Tea-tree and moonah overhead, tin roofs, salt on both sides of the peninsula and plenty of homes empty midweek. We have three written-up Blairgowrie systems to show how we design for it, installed by our own A-Grade electricians.
Blairgowrie blocks tend to come with scrub. Coastal tea-tree and moonah grow close around the houses, the roofs are often low-pitched tin or Klip-Lok, and in winter the sun sits low enough that a lot of it never reaches the panels. Plenty of installers look at that and suggest a smaller system or none at all. We would rather work out where the light actually lands.
On one Blairgowrie home that meant lifting the array onto tilt frames so the panels face back into the winter sun. On another it meant a modest 8kW of panels paired with a much larger battery, so the house stores everything the roof makes during the day. On a third, a double-storey home, it meant rewiring to three phase and taking the house off gas altogether. Three different answers on the same stretch of coast.
The rest of the design is about the setting. Salt comes off both the bay and the back beaches, so mounting and outdoor enclosures are rated for it. The Peninsula loses power in strong wind, so backup circuits are worth setting up. And when the house is a second home, monitoring on your phone matters. See our other work in Blairgowrie.
Jinko and Aiko panels; Sigenergy, GoodWe, Tesla Powerwall and Sungrow batteries; Sigenergy, GoodWe and Tesla EV chargers. All installed by Powerband staff.
Where a flat Klip-Lok or tin roof sits under scrub, raising the panels on tilt frames angles them into the low winter sun and over some of the shade. It is more work than flush mounting, and on the right roof it is worth it.
When the roof can only take a modest array, a large battery makes every kilowatt count by storing the daytime output for the evening. We size the battery to the house, not just to the panels.
Solar, battery, heat pump hot water, induction cooking, reverse cycle heating and an EV charger, planned as one project. Where a single-phase board cannot carry it, we upgrade the supply and the switchboard first.
App monitoring, battery settings that suit an empty house, and backup circuits for the fridge and security so a midweek outage does not cost you a freezer full of food.
The full range is on our products page.
Tier-one panels with 25-year performance warranties, laid out for the roof faces you have.
Hybrid and string inverters, chosen so a battery can join the system now or later.
Home batteries sized to the evening peak, with backup circuits set up for outages.
Home chargers wired into the same system and set to charge from your solar first.
Each of these is a written-up Blairgowrie install. Open any of them for the full specification.
A Klip-Lok roof under Peninsula scrub, with little winter sun. We raised 27 Jinko panels on tilt frames, mounted a Sigenergy SigenStor inverter and three battery modules on the garage wall, and fitted a 7kW Sigen charger for a future EV.
Seventeen Jinko panels feed a 6kW single-phase inverter and six battery modules in the garage, so the evening runs on what the roof collected during the day.
A double-storey home on a single-phase board. We rewired it to three phase, fitted 36 panels and 32kWh of Sigenergy storage, and replaced the gas with heat pump hot water, induction and split systems.
We are about 50 minutes from Blairgowrie, so visits and installs are booked with the trip in mind and the crew arrives with everything needed.
We meet you at the house, often on a Friday or a weekend, and look at the roof, the scrub, the switchboard and where a battery can go.
We decide between flush mounting and tilt frames, and which faces are worth using once the trees are taken into account.
Panel layout, battery size, brands, any switchboard or supply upgrade, and the price after the discounts you qualify for.
If you cannot be there on the day, we arrange keys or access and send photos when the job is done.
We set up the app, the backup circuits and the battery settings, and walk you through them in person or on a call.
Second homes and main residences are treated differently for one of these. We check before we quote.
For eligible owner-occupiers on the panels and inverter of their main residence. Two of the three Blairgowrie jobs above had it handled for them. There is no Solar Victoria battery rebate or loan now.
The federal battery discount, around 30 percent off an approved battery with no income test, and it applies to holiday homes as well.
Federal certificates that reduce the price at the point of sale. If you are also replacing the heating, see heating and cooling in Blairgowrie.
Three written-up Blairgowrie homes, each with a different problem solved.
A shaded Klip-Lok roof, a small roof with a big battery and a full electrification job, all in Blairgowrie.
When the board or the single-phase supply is the limit, our electricians upgrade it as part of the same project.
New Energy Tech Approved Seller, licensed under REC 32300, and nothing subcontracted.
Salt-rated mounting and enclosures on both the bay and ocean sides of town.
Live Google reviews. Look for the Sigenergy, GoodWe and Powerwall jobs.
Ask us about your Blairgowrie roof on 0466 355 441.
Often it is. We check where the sun actually lands across the year, then use the best faces, raise panels on tilt frames where that helps, or pair a smaller array with a larger battery. We will tell you plainly if the shade is too heavy.
They are frames that lift the panels to a steeper angle than the roof. They suit low-pitched tin and Klip-Lok roofs where a better angle catches more winter sun. On a pitched tile roof they are rarely needed.
Yes. Every system comes with app monitoring for generation, battery level and usage, and we set it up with you at handover.
Sometimes the supply needs to be upgraded first. On the double-storey Blairgowrie job above, we rewired to three phase and fitted a new switchboard before the solar, battery, heat pump and EV charger went in.
Batteries go in the garage or on a sheltered wall out of direct weather, and the outdoor mounting, isolators and enclosures are rated for coastal conditions.
Yes. Two of the Blairgowrie jobs on this page included one, a 7kW Sigen charger and a 22kW charger on a three-phase supply.
A site visit when you are down, then a written quote with the layout, mounting, battery and after-discount price. No obligation.
