Solar and battery Burwood VIC 3125

Solar and battery for Burwood brick veneers

Jinko and Aiko panels with Sigenergy, GoodWe, Tesla or Sungrow batteries, matched to your supply and your evening load and fitted by our own A-Grade electricians. We service Burwood from Somerville, with rebates handled on the quote.

  • ★★★★★ Rated Excellent on Google
  • SAA accredited installer
  • 50 min from our Somerville base
Burwood supplySingle and three-phase mix
Typical roofPostwar brick veneer, tile
Battery sized forThe 4pm to 9pm peak
Old boardsUpgraded in the same visit
Solar in Burwood

Single phase or three? Check first

The thing that most shapes solar and battery in Burwood is not the roof. It is the supply. Burwood has a mix of single-phase and three-phase connections, and which you have depends on the street and the age of the connection. That decides the inverter we choose, how large a battery works well, and what the network will let you export, so it is the first thing we read at the inspection.

Most of the housing is postwar brick veneer with some 1980s infill, and the roofs are mostly straightforward tile or tin with room for a good array. A single-phase house is not a problem. Our Oakleigh South job, just south of here, was a single-phase home with 26 Jinko panels and a 24.18kWh Sigenergy system on the outside brick wall. A three-phase home simply gets a larger inverter option on the same principles.

The next job is the board. Plenty of Burwood switchboards are the original and need work before a battery can sit behind them. We check it, price any upgrade into the same fixed quote, and fit it alongside the other work we do in Burwood.

Sigenergy battery modules on an exterior brick wall in oakleigh south
Three Sigenergy modules on a brick wall at our Oakleigh South job, a few suburbs south of Burwood.
What we install in Burwood

Sized by your supply, then your roof

The hardware is the same one the whole company uses. The choice between it depends on your phase.

01

Single-phase systems

A single-phase hybrid inverter, Sigenergy, GoodWe, Sungrow or Fronius for the solar side, runs panels and a battery together. For a typical Burwood brick veneer that means a 24kWh battery in the garage or on a wall, with backup circuits for the essentials.

  • Single-phase hybrid inverters
  • Sigenergy, GoodWe, Sungrow
  • Backup circuits configured
02

Three-phase systems

If your home is three-phase, the inverter and battery can spread load across all three. That gives more headroom for a heat pump, an induction cooktop and an EV charger later, and it avoids tripping limits that single-phase homes meet.

  • Three-phase inverters
  • Sigenergy and GoodWe
  • Headroom for EV charging
03

Panels and layout

Jinko Tiger Neo and Aiko panels laid out around hips, chimneys and vents. On a smaller infill roof we use a higher-output panel to make the most of the area, and the layout is drawn before you sign.

  • Jinko and Aiko
  • Tile and tin roofs
  • Layout drawn before you sign
04

Switchboard and metering

Original boards with old fuses are replaced where needed, with room left for the circuits that come later. We also arrange the meter change with your retailer.

  • New board where needed
  • Room for future circuits
  • Certificate of Electrical Safety
Products we install in Burwood

The full range is on our products page.

Solar panels BurwoodSolar panels

Tier-one panels with 25-year performance warranties, laid out for the roof faces you have.

  • Jinko
  • Aiko
Solar inverters BurwoodSolar inverters

Hybrid and string inverters, chosen so a battery can join the system now or later.

Home battery BurwoodBattery storage

Home batteries sized to the evening peak, with backup circuits set up for outages.

  • Sigenergy
  • GoodWe
  • Tesla Powerwall
  • Sungrow
  • SolarEdge
Solar battery installation BurwoodEV chargers

Home chargers wired into the same system and set to charge from your solar first.

  • Sigenergy
  • GoodWe
  • Tesla Wall Connector
Jobs nearby

Three eastern suburbs systems

None of these is in Burwood itself, but they are the closest written-up jobs. Open any for the full specification.

All case studies

Oakleigh South: single phase, 24.18kWh

Twenty-six 510W Jinko panels, 13.26kW in total, on a single-phase home. A Sigenergy SigenStor inverter and three battery modules sit on the exterior brick wall. This one went ahead without the Solar Victoria rebate.

  • 26 x 510W Jinko panels
  • Three SigenStor modules
  • Single-phase supply
Read the case study

Surrey Hills: three roof faces, one battery

All-black panels spread across three faces of a tiled roof, feeding a Sigenergy hybrid inverter and 24.18kWh of storage behind bollards in the garage. Hot water and two split systems were done in the same visit.

  • 12.35kW across three faces
  • Sigenergy 24.18kWh
  • Solar Victoria rebate handled
Read the case study
How a Burwood install runs

Supply read, then sized

Each step in order, so you know what happens next.

Drone view of solar panels installed by powerband electrical
  1. 01
    Inspection and supply check

    We confirm single or three-phase, look at the board and the roof, and ask about your evening usage.

  2. 02
    Design and fixed quote

    Panel layout, inverter and battery sizes, and one after-rebate price.

  3. 03
    Paperwork lodged by us

    Solar Victoria, the federal discounts and the network approval all handled before install day.

  4. 04
    Install, normally one day

    Panels, inverter, battery and board work from our own team.

  5. 05
    Handover

    Monitoring on your phone, backup tested with you watching, and the electrical safety certificate issued.

Rebates in Burwood

What comes off a Burwood quote

Three incentives, three sets of rules. We apply the ones you qualify for.

01
STCs on the panels

Federal small-scale technology certificates come off the price at the point of sale on eligible systems. Nothing to claim afterwards.

02
Federal battery discount

Around 30 percent off an approved battery, with no income test. There is no Solar Victoria battery rebate or loan now. If you are replacing a gas heater at the same time, the Burwood heating and cooling page explains that discount.

03
Solar Victoria rebate and loan

For eligible owner-occupiers, on the panels and inverter only. Our Oakleigh South job above chose not to use it, our Surrey Hills job did.

Why Powerband in Burwood

A solar company that reads the board

Most problems with a battery start at the switchboard, so we start there too.

01
Supply matched to hardware

Single-phase and three-phase homes are both normal in Burwood, and we size for the one you have.

02
Our own A-Grade electricians

SAA accredited design and install, a New Energy Tech Approved Seller, and nobody subcontracted.

03
Heating and hot water in the same company

When the ducted heater or the hot water tank goes, the solar and battery are already sized for it.

04
Fixed price including the board

Any switchboard work is in the quote, not a surprise on the day.

Reviews

What solar and battery customers say

Live Google reviews. Look for the Sigenergy, GoodWe and Powerwall jobs.

Posted on Google Google
Brendan jopling profile picture
Brendan Jopling
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
The whole experience of working with Powerband has been fantastic. From the get go they were helpful with the design, requirements and answering all the questions we had about the install. We couldn't be happier with choosing them for the job. Special thanks to Bailey and the team for getting the entire installation done in one day it was a huge job so for it to be done and to such a high standard is much appreciated Thanks everyone at Powerband for all you've done
Posted on Google Google
Ken henderson profile picture
Ken Henderson
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
We have just had a Braemer Dominator reverse cycle ducted system installed by the Powerband Electrical team to replace our gas-fired system. We were very happy with the whole process, from the sales/design discussions with Dayle to the installation by the team led by Julian and including Logan and Darren. Using the existing ducting had its challenges but the team overcame them well. Julian set up the AirTouch5 control system & zoning with us and with a sudden cold snap arriving it has proven simple to use to create a comfortable environment. In fact we are already finding it far more effective system than the considerably larger gas unit and a more uniform heat with less draughts. Thanks to the Powerband team. Ken in Glen Waverley
Posted on Google Google
Nessrin m profile picture
Nessrin m
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Amazing service and work! Would definitely recommend Tim and his team 👍
Posted on Google Google
Carrick mclellan profile picture
Carrick McLellan
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Petris and his electrical team did 2 inverter airconditioner installs as part of our whole solar system install. Great workers, good thinkers who could sort out a couple of small issues in short order and wonderful people to have around our house. Organised and professional. Highly recommend Powerband.
Posted on Google Google
Brad adams profile picture
Brad Adams
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Work was carried out very effectively and efficiently with the guys cleaning up after themselves. Very happy with the service and end product.
Posted on Google Google
Darren morris profile picture
Darren Morris
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Very happy with our solar and battery install. Everything was well explained before, during and after and completed on time. Would definetly recommend.
Posted on Google Google
Jarrod bailey profile picture
Jarrod Bailey
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Had the Powerband team electrify out whole house. Updated the heating / cooling with split systems, replace gas cooktop & hot water and put solar on with a 30kw battery. No gas bill, solar is producing more energy than we consume. These days we barely even have the supply charge. As part of it, they put the package together of what we wanted and needed to future proof our house and showed us several options for paying for it, in the end we opted for a 5-year interest free loan. Looking at our numbers, most of the loan will be paid off from the savings from our gas and electricity savings. All the work and upgrades done and barely any out of pocket cost, nice.... The team were great - worked in with timing for the jobs when it worked for us. The boys on site were all great, friendly, polite and professional. Did the job well and packed up (and cleaned up) well. Happy to recommend Powerband to anyone wanting to electrify their house in a cost-effective way.
Posted on Google Google
Stephen wratten profile picture
Stephen Wratten
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Great local friendly Aussie company, very neat job, cleaned up after. Installed 15kw solar and 24kw Sigenergy, zero hassles.. 👍
Posted on Google Google
Liga byron profile picture
Liga Byron
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
The installation guys were really good. Polite. And cleaned up when the job was done. I would highly recommend them. The price was also very good.
Posted on Google Google
Will livesay profile picture
Will Livesay
Google star 1Google star 2Google star 3Google star 4Google star 5Trustindex verifies that the original source of the review is Google.
Powerband Electrical are always great to work with. Reliable, professional, and easy to coordinate with on jobs. Their team communicates well and turns up when they say they will. Highly recommend.
FAQ

Burwood solar questions

Anything else, call 0466 355 441. You will get an electrician, not a salesperson.

How do I know if my Burwood house is single or three-phase?

Look at your meter box or your bill, or just ask us. We confirm it at the inspection. It changes the inverter and the battery layout, but both work well.

Is a battery worth adding to a single-phase home?

For most households with a busy evening, yes. It shifts your own solar into the evening peak and gives you backup circuits.

What can I fit on a postwar brick veneer roof?

It depends on the planes, but a typical roof takes from 6.6kW to about 13kW. We draw the layout for your roof before you commit.

My switchboard is original. Is that a problem?

It can be. Old fuses and no RCD protection must be upgraded first. We check it and include the work in your fixed price.

Can you replace an old solar system?

Yes. We remove the old array and fit a new one, as we did at our Doncaster job. We tell you honestly whether an old inverter can be kept.

When can the install happen?

Inspection within the week, then the quote, and an install usually in a single day once the approvals are in.

Get started

Get a fixed solar quote in Burwood

An inspection, then a written quote with the panel layout, battery size, brands and the after-rebate price. No obligation.

Get your free quoteWe reply within one business day
Your details stay private. No spam, no obligation.