Switchboard and circuits
Before the walls close, we check the board, plan the circuits for heating, hot water, cooktop and charger, and label everything. Any upgrade is part of the fixed price.
- Board checked
- Circuits planned
- Labelled
A renovation is the cheapest moment to leave gas behind, because walls are open and the switchboard is already being looked at. We plan heating, hot water, cooking, solar, battery and EV charging together, with every trade in-house.
Brighton has a steady flow of renovations, extensions and knockdown rebuilds, and every one of them is a decision point about gas. New Victorian homes are being built all-electric, and the older stock around them still has gas heating, a gas hot water tank and a gas cooktop. For home electrification Brighton owners who are already doing building work have an advantage: the walls, the ceiling and the switchboard are being touched anyway.
Our Brighton job shows the pattern. Heat pump hot water replaced the old rooftop unit, a new solar and battery system went on, a 7kW EV charger was added, and the switchboard was moved inside. The house now has no gas left. Not every home goes that far in one go, but the principle is the same: work out the end point first, then decide the order.
We check the switchboard, list the gas appliances, look at the roof and write one plan with a fixed price for each stage. You can do it all alongside the builders or spread it out later. It is part of our work across Brighton, and it keeps the final result tidy.
What to sort first when you are renovating or rebuilding.
Before the walls close, we check the board, plan the circuits for heating, hot water, cooktop and charger, and label everything. Any upgrade is part of the fixed price.
Reverse cycle replaces gas ducted or wall heaters, from Braemar, Mitsubishi Electric or Hisense. New R1.5 ducts are the default on a ducted swap, typically one to two days.
A heat pump replaces the gas storage tank or the old rooftop unit, normally in one day with plumber and electrician together. An induction cooktop goes on its own circuit.
Large Brighton roofs suit solar, and a battery covers the evening load. An EV charger can go in alongside, or later once the garage is built.
The full range is on our products page.
Ducted reverse cycle on new R1.5 ducts, or split systems, in place of ducted gas or a wall furnace.
A heat pump in place of the gas storage or instantaneous unit, usually changed over in one day.
The last gas appliance in most kitchens, replaced with induction on its own circuit.
Solar and storage sized for the new electric load, with an EV charger on the same system.
The first card is our Brighton job. The others are from Mordialloc and Blairgowrie.
Nineteen Jinko panels (9.025kW), a GoodWe home energy system with 16.64kWh of storage and a 7kW EV charger. Heat pump hot water replaced the old rooftop unit, the switchboard moved inside, and the house has no gas left.
Down the bay in Mordialloc, 13.3kW of Jinko solar on a tile roof, 24.96kWh of GoodWe storage by the switchboard, and the gas cooktop replaced with induction on its own circuit.
A double-storey home on a single-phase board, rewired to three phase. Mitsubishi Electric splits, heat pump hot water, induction, 17.1kW of solar, 32kWh of Sigenergy storage and a 22kW EV charger.
We fit around your build programme, or work to our own if there is none.

We look at the switchboard, every gas appliance, the roof and any building plans.
The order of work, what each step needs from the board, and which incentive goes with which item.
Each stage is priced separately so you can fit it around the build.
Electricians and plumbers from one company, working to the plan.
Circuits labelled, apps set up, compliance paperwork issued and the last gas appliance removed.
Incentives attach to specific items, so we list them one by one.
Solar Victoria rebate and interest-free loan cover solar panels and inverters only, for eligible owner-occupiers. Batteries get the federal discount of around 30 percent. STCs apply to the panels.
The Victorian Energy Upgrades discount applies to reverse cycle heating and cooling and heat pump hot water, largest when replacing gas. See heating and cooling in Brighton for the swap.
There is no rebate on induction cooktops or home EV chargers in Victoria, so both are a straight fixed price.
When there are builders on site, fewer separate trades means fewer clashes.
A-Grade electricians and plumbers on our own payroll, nothing subcontracted.
More than 5,000 Melbourne homes have started on electrification with us.
Circuits and positions agreed while access is easy.
Do it all at once or in steps, with the plan fixed from day one.
Live Google reviews. Look for the whole-home and off-gas jobs.
Questions from Brighton owners planning a renovation or rebuild.
During is usually easiest, because access is open and the switchboard is already being considered. We can work to your build programme.
Yes. Many households stage it. Once the last gas appliance goes, you can stop paying for a gas connection you no longer use.
We check it before quoting. If an upgrade is needed it is part of the fixed price, and every new circuit is labelled.
We coordinate timing with your builder so the electrical and plumbing work lands at the right stage.
No. Both are a fixed price in Victoria. Rebates apply to solar, batteries, heating and cooling, and heat pump hot water.
Braemar, Mitsubishi Electric and Hisense for heating and cooling. Emerald, Reclaim, iStore and Haier heat pumps for hot water. Jinko and Aiko panels, with Sigenergy, GoodWe and other batteries.
Book a free inspection. We look at the switchboard, the gas appliances and the roof, then write you one plan.